Providing your vehicle with a fantastic shine can be quite tasking. Generally, there are 2 methods of doing this, which are hand waxing or using an electric buffer. However, the former method can guarantee that the color and shine of your vehicle really stands out. Opting to use a buffer, unlike what some people think, isn’t always the best choice. This is due to its high speed mechanism, which can ultimately wear down or at worst, even peel off the paint. This is particularly true if you haven’t repainted your vehicle for some time. Below, are some simple tips on how to wax a car without a buffer that can come in handy.
Prepare your car for waxing
First of all, take your time to wash your vehicle thoroughly with a solution of soap and water. Afterwards ensure that the surface is totally dry. Wax cannot adhere effectively to dirt or moisture as when contrasted with a sparkling clean surface. Should the paint of your car be dull or have scratches, use a rubbing compound prior to waxing. This is a slight abrasive that works by eliminating a thin layer of clear coat from your vehicle’s painted surface. Which allows it to present a smoother and consistent waxing color.
Always wax your car in temperatures of from 55 to 88 degrees Fahrenheit. In extremely hot temperatures, wax tends to dry almost instantaneously upon application. On the other hand, in colder temperatures, wax cannot be moved about efficiently, and therefore can’t be applied in a consistent manner.
Choose the right car wax product
Typically, a car wax product, which contains authentic camauba is usually the best option, despite its cost. Steer clear from cleaner wax that is harsh and can remove your vehicle’s clear coat completely. Additionally, spray wax doesn’t last for long before it falls prey to exposure to the elements (normally a couple of weeks).
How to wax your car properly
Put some wax on the foam applicator that is included in the whole wax package. A silver dollar sized of wax should be okay for every 2” X 2” section of your car’s surface. If there is no foam applicator, utilize a damp sponge. Begin waxing with delicate, overlapping round motions to ensure the wax is applied consistently onto the surface. Ideally such strokes should integrate a force of from 3 lbs – 5 lbs.
Once you are done, let the wax sit for a couple of minutes according to the exact manufacturer’s instructions. To determine if the wax is ready to come off, take a swipe at it with a finger. If there is smearing it isn’t ready, but if it’s clear, it’s ready. Finally, the last step of how to wax a car without a buffer, is giving it a comprehensive polishing. Use a microfiber cloth to wipe off residual wax with circular motions, and you will be good to go.